Urban Engineering has completed over 80 individual survey projects at 36
different airports and air bases within Arizona.
Glendale
Goodyear
Nogales
Cottonwood
Greenlee
County
Coolidge
Deer Valley
Eloy
Pinal
Bisbee
DMAFB
Ryan
Marana
Place mouse over
location for project
information.
FLAGSTAFF PULLIUM
AIRPORT
TAXIWAY A and POWELL BLVD.
Topo and As-Built Survey. Collected
pipe data for existing catch basins.
Prepared Legal Description for
Sewer Easement.
TRACTS 3 & 5B
Boundary Survey & Parcel Research
HANGAR AREA
Topographic Survey
COTTONWOOD MUNICIPAL
AIRPORT
SECURITY FENCING
Construction Staking
PRESCOTT MUNICIPAL AIRPORT
RUNWAY 3L21R
Construction Staking
RUNWAY 3L21R TAXIWAY A
Topographic Survey
LOT 1 PAVING
Construction Staking
COCHISE COUNTY /
WILLCOX AIRPORT
TAXIWAY ALPHA and TAXIWAY
BRAVO
Survey Control and Topographic
Map for over 3,000 feet of taxiway.
BISBEE MUNICIPAL AIRPORT
FIRE SUPPRESSION SYSTEM MITL
Topographic Survey of approx. 2.3 acres
for the location of water tanks and pump
housing. Established vertical and
horizontal control.
RUNWAY 17-35 WIDENING
Cross sections at centerline and edge of
runway, and shoulders. Located edge of
runway lights and the connecting taxiways.
SAFFORD REGIONAL AIRPORT
AVIATION WAY AND TAXIWAY E
Topographic Survey for approx. 2,200’. Established survey
control, provided cross sections, and located all above
ground improvments and utilities.
TAXIWAY B AT CONNECTION WITH TAXIWAY B-2
AND TAXIWAY E
Topographic Survey for approx. 1900’. Located all above
ground improvements and utilities.
RUNWAY 12-30
Topographic Survey. Established survey control and
centerline of runway. Provided elevations along centerline.
Located all above ground improvements and utilities and
provided a grid at each intersection with Taxiway B and
each side of Runway 8-26.
APRON REHABILITATION, RECONSTRUCTION
AND MARKING
Topographic Survey. Verified existing and established
additional control. Provided grid topo for the area south of
Taxiway D. Provided additional elevations west/east also
along the edge and centerline for Taxiway D and at existing
concrete pads south of the proposed limits. Provided invert
elevations for storm drain, electric pull boxes, tiedowns and
existing striping. Provided topo and outside limits east of
the terminal and located abutting taxiways. Established
elevations on adjacent concrete aprons and walks and for
gravel area. Located gas tank concrete base, bollards
including Taxiway D and each end of Runway 12-30, 8-26.
Established bearing and distance for each runway.
TUCSON INTERNATIONAL AIRPORT
Urban Engineering has completed numerous individual projects at
Tucson International Airport. Below is a short list of these projects.
Please contact our Survey Department for more detailed information of
the work completed.
TERMINAL APRON REHABILITATION - RUNWAY 11R/29L
Topographic Survey for the relocation and upgrade to Runway 11R/29L.
Gathered data on each concrete joint and at center point.
SITE NORTH OF AIRPORT WASH
Topographic Survey from north edge of Airport Wash to Elvira Road and
from the east property line to Plumer Ave.
APRON EXPANSION
Design Survey for proposed apron expansion. As-built existing apron including
all buildings, roadway, fences, blast wall and above ground utilities.
RUNWAY 21 AND 29R PAPI LIGHTS
Construction layout and As-Built Survey
CONCOURSE EXPANSION
Topographic Survey
RUNWAY 11L/29R ANTENNAE
Established survey control using NGVD 83 for horizontal NAVD 27 for vertical.
Established the location of the existing antennae and the
relationship to the concrete pad.
AERO PARK DRIVE
Design Survey for 3500’ of roadway. As-Built Survey
AIR FREIGHT APRON EXPANSION & HELICOPTER PAD
Construction Staking